Honda Insight
Honda Insight
Honda Insight
The Honda Insight was a subcompact hatchback 3,945 mm (155.3 in) in length with a wheelbase of 2,400 mm (94.5 in) a height of 1,355 mm (53.3 in) and a width of 1,695 mm (66.7 in). The Insight was only available as a two-seater. Only three different trims were available: a manual transmission without air-conditioning, a manual transmission with automatic climate-control system, and a continuously variable transmission (CVT) with automatic climate-control system. Although produced until 2006, the only major change was the introduction of a trunk mounted, front controlled, multiple CD changer.
One key in increasing the vehicle's fuel efficiency was reducing the mass via the extensive use of aluminum and plastic. Honda built the Insight with aluminum front brake calipers and rear brake drums; the fuel tank was plastic; the engine mounts were aluminum; and the exhaust was a small, thin wall pipe. The Insight weighed 1,847 lb (838 kg) in manual transmission form or 1,964 lb (891 kg) with CVT and air conditioning. The combination of materials and design gave the Insight body structure 13 percent more bending strength and 38 percent more torsional rigidity than a comparably-sized steel body, despite weighing 40 percent less.
The Honda Insight was a subcompact hatchback 3,945 mm (155.3 in) in length with a wheelbase of 2,400 mm (94.5 in) a height of 1,355 mm (53.3 in) and a width of 1,695 mm (66.7 in). The Insight was only available as a two-seater. Only three different trims were available: a manual transmission without air-conditioning, a manual transmission with automatic climate-control system, and a continuously variable transmission (CVT) with automatic climate-control system. Although produced until 2006, the only major change was the introduction of a trunk mounted, front controlled, multiple CD changer.
One key in increasing the vehicle's fuel efficiency was reducing the mass via the extensive use of aluminum and plastic. Honda built the Insight with aluminum front brake calipers and rear brake drums; the fuel tank was plastic; the engine mounts were aluminum; and the exhaust was a small, thin wall pipe. The Insight weighed 1,847 lb (838 kg) in manual transmission form or 1,964 lb (891 kg) with CVT and air conditioning. The combination of materials and design gave the Insight body structure 13 percent more bending strength and 38 percent more torsional rigidity than a comparably-sized steel body, despite weighing 40 percent less.




NSX by carrying the 5.5 L V10 naturally aspirated engine output up to 600 ps hp and 600 Nm torque, the new engine and will use a similar 3.5 of the eighth generation Accord VCM technology, in low-speed driving, 10-cylinder will only have five working, transmission system will be sent to an uprated Super-Handling AWD system via a new six-speed dual-clutch transmission. Re-modified Light SH-AWD system but also the Guowan new push to the new speed limit. NSX's new aerodynamic design using the technology from Formula One, even if no new NSX equipment large tail at high speed can provide a good vehicle stability under pressure As for the control of body weight in about 1500 kg. Honda stationed in Newburgh forest NSX team will test the limits this fall to conduct a test lap, the British media estimated the new NSX will be faster than R35 GT-R (or even Lexus LF-A).










